3mm Sbs APP Polymer Modified Bitumen Waterproofing Membrane with Schist
1. Product Introduction:
SBS(Styrene Butadiene Styrene) Modified Bitumen Membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene-SBS), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral slates (or grains) or polythene membrane etc.
APP(Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastics (such as APP, APAO, APO), then covering double faces with thermoplastic elastomer (SBS) and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane etc. while downward face with fine sands or polythene membrane.
1) Roof and underground in industrial and civil buildings;
2) Bridge, subway, tunnel, swimming pool, etc.
3) Waste landfill, sewage plant, irrigation system, etc.
|Thickness||3mm, 4mm, 5mm|
|length||10m, or on demand|
|Surface||PE film, Aluminum foil, Yellow sand, Shale gravel(Schist), Colored sand|
|Notice||Sbs Modified Bitumen Membrane is specially applied in the cold district, |
APP Modified Bitumen Membrane is more suitable for hot district with high temperature.
|Note||Self adhesive type |
Thickness: 1.2mm, 1.5mm, 2mm, 3mm, 4mm; With or without polyester felt
Surface: PE film, Aluminium foil, Double-sided adhesive
|Certificate|| ISO 9001/14001 |
Contact us if you need more details on Sbs APP Polymer Bitumen Waterproofing Membrane. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Sbs APP Modified Bitumen Waterproofing Membrane、3mm Sbs App Bitumen Waterproofing Membrane. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : sbs/app bitumen waterproof membrane